Pulsafeeder L9902900-000 PULSAtron PVDF Chemical Tubing 1/4 Inch ID x 3/8 Inch OD

The Pulsafeeder L9902900-000 is PVDF chemical tubing designed for use in compatible PULSAtron chemical metering pump installations and industrial fluid-handling systems. The tubing features a 0.250-inch inside diameter and a 0.38-inch outside diameter, providing a specified tubing size for applications requiring PVDF construction.

The manufacturer catalog identifies this product as TUBING(PVDF), .250IDX.38OD BULK. It is listed as bulk tubing priced per foot, with manufacturer catalog documentation indicating a minimum order quantity of 25 feet.

Product Specifications

• Manufacturer: Pulsafeeder
• Part Number: L9902900-000
• Product Name: PVDF Chemical Tubing
• Catalog Description: TUBING(PVDF), .250IDX.38OD BULK
• Material: PVDF (Polyvinylidene Fluoride)
• Inside Diameter: 0.250 Inch (1/4 Inch)
• Outside Diameter: 0.38 Inch (Nominal 3/8 Inch)
• Approximate Inside Diameter: 6.35 mm
• Approximate Outside Diameter: 9.65 mm
• Calculated Nominal Wall Thickness: Approximately 0.065 Inch
• Supply Form: Bulk Tubing
• Catalog Unit: Per Foot
• Manufacturer Catalog Minimum: 25 Feet
• Product Family: PULSAtron Accessories
• Pressure Rating: Manufacturer Verification Required
• Temperature Rating: Manufacturer Verification Required

PVDF Chemical Tubing Construction

The L9902900-000 tubing is manufactured from polyvinylidene fluoride (PVDF), a fluoropolymer commonly selected for applications requiring chemical resistance.

PVDF is used in industrial fluid-handling systems involving compatible chemicals, water treatment solutions and chemical dosing equipment.

Actual chemical resistance depends on the fluid composition, concentration, operating temperature and pressure. Always confirm the tubing material is suitable for the intended application.

1/4-Inch ID x 3/8-Inch OD Tubing

The tubing has a specified 0.250-inch internal diameter and 0.38-inch external diameter.

The internal diameter determines the nominal fluid passage size, while the outside diameter is important for selecting compatible compression fittings, tubing connectors and pump accessories.

Confirm the exact fitting requirements before installation. Tubing with a similar outside diameter but a different material or wall thickness may not be interchangeable.

Bulk Tubing Sold by the Foot

Pulsafeeder catalogs list L9902900-000 as bulk PVDF tubing supplied by the foot.

Manufacturer catalog documentation specifies a minimum quantity of 25 feet. Individual distributor ordering quantities may differ, so confirm the supplied length and minimum order requirement before purchasing.

Potential Applications

• Compatible PULSAtron chemical metering pump installations
• Industrial chemical feed systems
• Water treatment chemical dosing equipment
• Compatible chemical transfer connections
• Process fluid-handling tubing replacements
• Maintenance of chemical injection systems
• Replacement of worn or chemically degraded tubing

Chemical Compatibility

PVDF offers resistance to many industrial chemicals under appropriate operating conditions. However, compatibility is not universal.

Verify the chemical type, concentration, temperature, operating pressure and any regulatory requirements before using this tubing.

Installation and Maintenance

Inspect the tubing for cuts, cracks, kinks, discoloration, deformation and signs of chemical deterioration.

Use fittings approved for the tubing outside diameter, material and system pressure.

Route the tubing to avoid excessive bending, abrasion, heat exposure and mechanical stress.

Before replacing tubing, isolate the chemical feed system, release pressure and follow the applicable equipment maintenance instructions.

Ordering Information

Order the Pulsafeeder L9902900-000 using the exact part number and verify the required tubing length.

Confirm the 1/4-inch ID x 3/8-inch OD PVDF configuration and any minimum order quantity before purchase.