Pulsafeeder L3300V03-PVC PVC/Viton Bleed Valve Assembly - 1/2-Inch
PVC/Viton bleed valve for VVC3 and WVC3 wet ends, with 1/2-inch tubing connection and included PTFE gasket.
The Pulsafeeder L3300V03-PVC is a PVC/Viton bleed valve assembly with a 1/2-inch connection for PULSAtron VVC3 and WVC3 wet ends. It assists in removing trapped air during metering pump priming.
Priming VVC3 and WVC3 Liquid Ends
Air trapped in the pump head can interrupt chemical delivery. The bleed valve provides a controlled venting point during startup or maintenance when operated according to the pump instructions.
Verified Specifications
- Part Number: L3300V03-PVC
- Product: Bleed Valve Assembly
- Body: PVC
- O-Ring Material: Viton / FKM
- Connection: 1/2-Inch OD Tubing
- Included: PTFE Gasket
- Listed Wet Ends: VVC3, WVC3
PVC Body with Viton Sealing
This configuration uses PVC housing material and Viton sealing rather than the PTFE seals used in T-series bleed valves. Confirm chemical compatibility with the full pump liquid-end assembly.
Connection and Fit
Use the 1/2-inch connection specified for the original pump. A 3/8-inch L3300V01-PVC assembly is a different configuration.
Maintenance and Replacement
Inspect for deposits, leakage and damaged fittings. Release pressure and follow the Pulsafeeder bleed-valve replacement procedure.
Ordering
Choose L3300V03-PVC for the PVC/Viton bleed valve used with VVC3 and WVC3 wet ends.
| Type | Accessories |
|---|
