Pulsafeeder L3300V03-FPP FPP/Viton Bleed Valve Assembly - 1/2-Inch
FPP/Viton bleed valve for PVC3 and PVS3 wet ends. 1/2-inch tubing connection with PTFE gasket for compatible PULSAtron metering pumps.
The Pulsafeeder L3300V03-FPP is a 1/2-inch FPP/Viton bleed valve assembly listed for PULSAtron PVC3 and PVS3 wet ends. It combines an FPP body with Viton sealing for the specified liquid-end configuration.
Application in Chemical Pump Priming
During initial startup or after service, trapped air may need to be released from the liquid end. The bleed valve provides the designated venting connection for this procedure.
Product Specifications
- Manufacturer: Pulsafeeder
- Part Number: L3300V03-FPP
- Body Material: FPP / Polypropylene
- Sealing: Viton / FKM
- Connection: 1/2-Inch OD Tubing
- Gasket: PTFE Included
- Wet Ends: PVC3, PVS3
Why the FPP Variant Is Different
L3300V03-FPP is distinct from L3300V03-PVC because the valve body material and compatible wet-end listings differ. Both use Viton sealing and the same nominal connection size.
Chemical Compatibility
Verify FPP and Viton suitability for the chemical concentration, temperature and operating conditions. Match the original pump construction.
Service Checks
Inspect the valve for leakage, damage and deposits. Also check the return tubing and suction system if priming problems persist.
Installation
Isolate the pump, relieve pressure and follow the manufacturer instructions for bleed valve replacement and priming.
Ordering
Specify Pulsafeeder L3300V03-FPP for the PVC3 or PVS3 FPP/Viton bleed valve configuration.
| Type | Accessories |
|---|
