Pulsafeeder L3300H01-FPP PULSAtron FPP/CSPE Bleed Valve Assembly - 3/8-Inch OD
PULSAtron bleed valve assembly for PHC1 wet ends. FPP polypropylene body, CSPE O-rings, PTFE gasket and 3/8-inch OD connection help vent trapped air during pump priming.
Air trapped inside a chemical metering pump can interrupt priming and produce inconsistent delivery. The Pulsafeeder L3300H01-FPP PULSAtron bleed valve assembly provides a controlled means of venting air from compatible PHC1 wet-end installations.
Built for Pump Priming
The bleed valve connects at the pump discharge fitting. During priming, the operator opens the bleed adjustment to release trapped air through the return connection. Once a steady liquid stream is established, the valve is closed according to the pump instructions.
Verified Construction
- Part Number: L3300H01-FPP
- Assembly: Bleed Valve
- Body: FPP / Polypropylene
- Seals: CSPE / Hypalon
- Included: PTFE Gasket
- Tubing: 3/8-Inch Outside Diameter
- Wet End: PHC1
Where It Fits
Distributor compatibility information lists PHC1-family PULSAtron wet ends, including K2-PHC1, K3-PHC1 and K4-PHC1. Confirm the complete pump model and existing liquid-end arrangement before installation.
When to Service the Bleed Valve
Inspect the assembly if the pump cannot prime normally, if chemical leaks around the bleed fitting or if the adjustment mechanism is damaged. Deposits and worn sealing components may also require attention.
Ordering
Select L3300H01-FPP when a 3/8-inch FPP/CSPE bleed valve assembly is specified for the original pump.
| Type | Accessories |
|---|
