Pulsafeeder L3101HC3-PVD PVDF Suction Valve Assembly - KHC3 Wet End
PVDF suction valve assembly with Hypalon/CSPE O-ring and 1/2-inch OD tubing connection, designed for compatible PULSAtron KHC3 wet ends.
The Pulsafeeder L3101HC3-PVD is a PVDF suction valve assembly designed for PULSAtron metering pumps with the KHC3 wet-end configuration. It connects the chemical suction tubing to the pump inlet.
At the Pump Inlet
The suction valve operates as part of the pump check-valve system. During the suction stroke it permits liquid to enter the pump head, while the valve arrangement helps limit reverse movement during the discharge stroke.
Verified Details
- Manufacturer: Pulsafeeder
- Part Number: L3101HC3-PVD
- Component: Suction Valve Assembly
- Body Material: PVDF
- O-Ring: Hypalon / CSPE
- Connection: 1/2-Inch OD Tubing
- Wet-End Configuration: KHC3
- Included: O-Ring
PVDF Liquid-End Construction
PVDF is used in chemical-handling components where appropriate material compatibility is required. Confirm suitability for the specific chemical, concentration and operating temperature.
Symptoms That May Require Inspection
Difficulty maintaining prime, reduced metering output or leakage around the suction connection may warrant inspection of the valve and O-ring. These symptoms can also have other causes within the chemical feed system.
Installation Note
Match the original KHC3 wet end and 1/2-inch tubing connection. Follow Pulsafeeder installation instructions for the machined valve fitting and sealing arrangement.
Ordering
Specify L3101HC3-PVD for the PVDF KHC3 suction valve assembly.
| Type | Accessories |
|---|
