Pulsafeeder KX100-ABAC Chem-Tech KOPkit, Viton Seals, 3/8-Inch Tube
Chem-Tech Series 100/150/200 KOPkit for ABAC liquid ends: clear SAN/PVC head, Viton seats and O-rings, ceramic valve balls, 3/8-inch PVC suction and 3/8-inch PE discharge tubing.
Pulsafeeder KX100-ABAC KOPkit: Chem-Tech Kit with Viton Seals and 3/8-Inch Tubing
The Pulsafeeder KX100-ABAC is a Keep-On-Pumping (KOP) maintenance kit for Chem-Tech Series 100, 150 and 200 metering pumps with ABAC liquid ends. Often searched as a Chem-Tech KX100-ABAC repair kit or KOP kit, it combines a clear SAN/PVC pump head, Viton seats and O-rings, ceramic valve balls and 3/8-inch PVC suction and PE discharge tubing.
KX100-ABAC Technical Specifications
| Specification | Details |
|---|---|
| Manufacturer | Pulsafeeder |
| Part Number | KX100-ABAC |
| Product Type | Chem-Tech KOPkit |
| Compatible Pumps | Chem-Tech Series 100, 150 and 200 |
| Head and Fittings | Clear SAN / PVC |
| Seats and O-Rings | Viton / FKM |
| Valve Balls | Ceramic |
| Suction Tubing | 3/8-Inch (0.38-Inch) PVC |
| Discharge Tubing | 3/8-Inch (0.38-Inch) PE |
| Liquid-End Code | ABAC |
What the KX100-ABAC Part Number Means
Chem-Tech KOPkit numbers start with KX100 followed by the four-letter liquid-end code. In ABAC, the first three letters (ABA) identify a SAN/PVC head, Viton seats and O-rings and ceramic valve balls. The fourth letter (C) identifies 3/8-inch PVC suction and 3/8-inch PE discharge tubing.
How to Find the Right KOPkit for Your Pump
Read the four-letter liquid-end code from your Chem-Tech pump model number and add it after KX100-. A pump model in the format XXXX-XX-ABACXXX takes the KX100-ABAC kit.
Viton Seats and O-Rings
The B in the second position identifies Viton (FKM) seats and O-rings instead of the Hypalon used in the standard AAA liquid end. Confirm that Viton suits the chemical, concentration and temperature being metered.
KX100-ABAC Versus KX100-ABAA
Both kits share the SAN/PVC head, Viton seals and ceramic balls. KX100-ABAC uses 3/8-inch tubing on both sides, while KX100-ABAA uses 7/16-inch suction and 1/2-inch discharge tubing.
KX100-ABAC Versus KX100-AAAC
KX100-AAAC uses the same head, ceramic balls and 3/8-inch tubing but with Hypalon seats and O-rings. The second letter of the code tells them apart.
Typical Kit Contents
Pulsafeeder describes a typical Chem-Tech KOPkit as including a pump head assembly with suction and discharge valves, a diaphragm, head screws, washers and an exploded-view drawing. Confirm the exact KX100-ABAC package contents before installation.
Installation and Safety
Disconnect electrical power, isolate the chemical feed and relieve system pressure before servicing. Follow the official Pulsafeeder KOPkit installation instructions.
Frequently Asked Questions
Which pumps does the KX100-ABAC fit?
Chem-Tech Series 100, 150 and 200 metering pumps with an ABAC liquid-end code.
What is the difference between ABAC and AAAC?
ABAC uses Viton seats and O-rings and AAAC uses Hypalon. Head, valve balls and tubing are the same.
Ordering Information
Specify Pulsafeeder KX100-ABAC for the Chem-Tech ABAC SAN/PVC/Viton/ceramic maintenance configuration with 3/8-inch tubing.
| Type | Accessories |
|---|
