Pulsafeeder KX100-ABAA Chem-Tech KOPkit, Viton Seals, Ceramic Balls
Chem-Tech Series 100/150/200 KOPkit for ABAA liquid ends: clear SAN/PVC head, Viton seats and O-rings, ceramic valve balls, 7/16-inch PVC suction and 1/2-inch PE discharge tubing.
Pulsafeeder KX100-ABAA KOPkit: Chem-Tech Kit with Viton Seals and Ceramic Balls
The Pulsafeeder KX100-ABAA is a Keep-On-Pumping kit for Chem-Tech Series 100, 150 and 200 metering pumps with ABAA liquid ends. Also known as a Chem-Tech KX100-ABAA repair kit, it features a clear SAN/PVC pump head, Viton seats and O-rings, ceramic valve balls, 7/16-inch PVC suction tubing and 1/2-inch PE discharge tubing.
KX100-ABAA Product Specifications
- Manufacturer: Pulsafeeder
- Part Number: KX100-ABAA
- Compatible Pumps: Chem-Tech Series 100, 150 and 200
- Head and Fittings: Clear SAN / PVC
- Seats and O-Rings: Viton / FKM
- Valve Balls: Ceramic
- Suction Tubing: 7/16-Inch (0.44-Inch) PVC
- Discharge Tubing: 1/2-Inch (0.50-Inch) PE
- Liquid-End Code: ABAA
Decoding the ABAA Liquid End
The first three letters (ABA) identify a SAN/PVC head, Viton seats and O-rings and ceramic valve balls. The fourth letter (A) identifies 7/16-inch PVC suction and 1/2-inch PE discharge tubing.
How to Find the Right KOPkit for Your Pump
Chem-Tech KOPkit numbers are KX100- followed by the four-letter liquid-end code in the pump model number. A model in the format XXXX-XX-ABAAXXX takes the KX100-ABAA kit.
KX100-ABAA Versus KX100-AAAA
Both kits share the SAN/PVC head, ceramic balls and 7/16-inch and 1/2-inch tubing. KX100-ABAA uses Viton seats and O-rings, while KX100-AAAA uses Hypalon.
KX100-ABAA Versus KX100-DBAA
KX100-DBAA uses the same Viton seals, ceramic balls and tubing with a polypropylene head instead of SAN/PVC. The first letter of the code identifies the head material.
Typical KOPkit Components
A typical Chem-Tech KOPkit includes a pump head assembly with suction and discharge valves, a diaphragm, head screws, washers and an exploded-view drawing. Exact contents depend on the supplied kit revision.
Maintenance Checklist
- Confirm the Chem-Tech series on the pump nameplate.
- Verify the ABAA liquid-end code in the model number.
- Check SAN/PVC, Viton and ceramic material requirements.
- Inspect the suction and discharge tubing.
- Depressurize and isolate the pump before service.
Frequently Asked Questions
What seal material does the KX100-ABAA use?
Viton (FKM) seats and O-rings.
What tubing does the KX100-ABAA use?
7/16-inch PVC suction tubing and 1/2-inch PE discharge tubing.
Ordering Information
Choose Pulsafeeder KX100-ABAA for the Chem-Tech ABAA SAN/PVC/Viton/ceramic kit with 7/16-inch and 1/2-inch tubing.
| Type | Accessories |
|---|
