Pulsafeeder KX100-AAAC Chem-Tech KOPkit with 3/8-Inch Tubing

Pulsafeeder KX100-AAAC KOPkit: Chem-Tech Kit with 3/8-Inch Tubing

The Pulsafeeder KX100-AAAC is a Keep-On-Pumping maintenance kit for Chem-Tech Series 100, 150 and 200 metering pumps with AAAC liquid ends. Also searched as a Chem-Tech KX100-AAAC repair kit or KOP kit, it includes a clear SAN/PVC pump head, CSPE/Hypalon seats and O-rings, ceramic valve balls and 3/8-inch PVC suction and PE discharge tubing.

KX100-AAAC Technical Specifications

• Manufacturer: Pulsafeeder
• Part Number: KX100-AAAC
• Product Type: Chem-Tech KOPkit
• Compatible Pumps: Chem-Tech Series 100, 150 and 200
• Head and Fittings: Clear SAN / PVC
• Seats and O-Rings: CSPE / Hypalon
• Valve Balls: Ceramic
• Suction Tubing: 3/8-Inch (0.38-Inch) PVC
• Discharge Tubing: 3/8-Inch (0.38-Inch) PE
• Liquid-End Code: AAAC

Designed for Chem-Tech Pump Maintenance

KX100-AAAC is intended for Chem-Tech pumps with the AAAC liquid end, such as the Series 100 model X030-XA-AAACXXX. The liquid-end code in the model number must match the kit.

How to Find the Right KOPkit for Your Pump

Chem-Tech KOPkit numbers are KX100- followed by the four-letter liquid-end code. A model in the format XXXX-XX-AAACXXX takes the KX100-AAAC kit.

Hypalon Seals and Ceramic Balls

The AAA liquid end uses CSPE/Hypalon seats and O-rings with ceramic valve balls on a SAN/PVC head. Verify suitability for the chemical, concentration and operating temperature.

KX100-AAAC Versus KX100-AAAA

Both kits use the same AAA materials. KX100-AAAC uses 3/8-inch suction and discharge tubing, while KX100-AAAA uses 7/16-inch suction and 1/2-inch discharge tubing.

KX100-AAAC Versus KX100-AAAS

KX100-AAAS uses the same materials and 3/8-inch tubing sizes but specifies black PE discharge tubing. Match the fourth letter of your liquid-end code.

Typical Kit Contents

Pulsafeeder states that a typical Chem-Tech KOPkit includes a pump head assembly with suction and discharge valves, a diaphragm, head screws, washers and an exploded-view drawing. Verify the exact current KX100-AAAC packing list.

Installation Procedure

Confirm the AAAC liquid-end code, disconnect power, isolate the chemical supply and relieve system pressure before servicing. Follow the official Pulsafeeder KOPkit instructions.

Frequently Asked Questions

What tubing size does the KX100-AAAC use?

3/8-inch PVC suction tubing and 3/8-inch PE discharge tubing.

Where do I find my liquid-end code?

It is the four-letter block after the second dash in the Chem-Tech model number, for example AAAC in X030-XA-AAACXXX.

Ordering Information

Specify Pulsafeeder KX100-AAAC for the Chem-Tech AAAC SAN/PVC/Hypalon/ceramic maintenance configuration with 3/8-inch tubing.