Pulsafeeder K8PTCC PULSAtron Size 8 FPP/TFE/Ceramic KOPkit, 1/2-Inch FNPT

Pulsafeeder K8PTCC: Size 8 FPP/TFE/Ceramic KOPkit

The Pulsafeeder K8PTCC is a PULSAtron Size 8 maintenance kit for PTCC wet ends. It uses a glass-filled polypropylene head, TFE seats and O-rings, ceramic valve balls, a PTFE-faced CSPE-backed diaphragm and 1/2-inch FNPT piping connections.

Technical Specifications

• Manufacturer: Pulsafeeder
• Part Number: K8PTCC
• Product Family: PULSAtron KOPkit
• Head Size: 8
• Head and Fittings: FPP / Glass-Filled Polypropylene (GFPPL)
• Seats and O-Rings: TFE / PTFE
• Valve Balls: Ceramic
• Diaphragm: PTFE-Faced, CSPE-Backed
• Connections: 1/2-Inch FNPT Piping
• Wet-End Code: PTCC

Glass-Filled Polypropylene Construction

The P designation identifies a glass-filled polypropylene head, which distinguishes this kit from the PVC-headed K8WTCC and K8WTC8. Match the head material to the original pump.

TFE Seals and Ceramic Valve Balls

TFE seats and O-rings with ceramic balls are specified for the PTCC wet end. Verify compatibility with the process chemical.

Preventive Maintenance Application

KOPkits package the common liquid-end wear components for scheduled service, simplifying maintenance planning on high-capacity Size 8 pumps.

K8PTCC Versus K8WTCC

Both kits share the same size, seals, balls and 1/2-inch FNPT connections. K8PTCC uses an FPP head, while K8WTCC uses a PVC head.

Typical Kit Contents

Kits typically include a pump head assembly with suction and discharge valve cartridges, diaphragm, head screws, washers and an exploded-view drawing. Confirm the exact contents before installation.

Installation Recommendations

Isolate electrical power, relieve discharge pressure and follow the Pulsafeeder KOPkit service procedure.

Ordering Information

Specify Pulsafeeder K8PTCC for the Size 8 PTCC FPP/TFE/ceramic KOPkit with 1/2-inch FNPT connections.