Pulsafeeder K6VHC3 PULSAtron Size 6 PVC/Hypalon/Ceramic KOPkit
Pulsafeeder Size 6 VHC3 KOPkit with PVC head, CSPE/Hypalon sealing components, ceramic valve balls and 3/8-inch ID x 1/2-inch OD tubing.
Pulsafeeder K6VHC3: Size 6 PVC/Hypalon/Ceramic KOPkit
The Pulsafeeder K6VHC3 is a PULSAtron Size 6 Keep-On-Pumping maintenance kit for VHC3 wet ends. Its published configuration includes a PVC pump head, CSPE/Hypalon sealing components, ceramic valve balls and 1/2-inch outside-diameter tubing connections.
Technical Specifications
- Manufacturer: Pulsafeeder
- Part Number: K6VHC3
- Product Type: PULSAtron KOPkit
- Head Size: 6
- Head Material: PVC
- Seats and O-Rings: CSPE / Hypalon
- Valve Ball Material: Ceramic
- Suction Connection: 3/8-Inch ID x 1/2-Inch OD Tubing
- Discharge Connection: 3/8-Inch ID x 1/2-Inch OD Tubing
- Wet-End Designation: VHC3
Designed for Size 6 Pump Maintenance
K6VHC3 is intended for compatible Size 6 PULSAtron liquid ends. Its head size and material combination must match the original equipment before replacement.
PVC and Hypalon Materials
The PVC pump head and CSPE/Hypalon seats and O-rings are important identifiers of the VHC3 configuration. Verify suitability for the chemical, concentration and operating temperature.
Ceramic Check-Valve Balls
The published catalog identifies ceramic as the valve-ball material. Confirm the original valve arrangement and use the manufacturer-specified replacement components.
Preventive Maintenance Benefits
PULSAtron KOPkits simplify planned liquid-end maintenance by combining common replacement components into one package. They can help reduce downtime associated with sourcing individual service parts.
K6VHC3 Versus K5VHC3
Both kits use the same published PVC/Hypalon/ceramic material configuration and 1/2-inch OD tubing. However, K6VHC3 is designed for Size 6 pumps, while K5VHC3 is designed for Size 5 pumps.
Typical Kit Contents
Pulsafeeder states that solenoid diaphragm pump KOPkits generally contain a diaphragm, head, check-valve assemblies and associated maintenance components. Verify the exact current K6VHC3 packing list.
Installation Procedure
Confirm the Size 6 VHC3 configuration, disconnect power, isolate the chemical supply and relieve system pressure before servicing. Follow the official Pulsafeeder KOPkit instructions.
Ordering Information
Specify Pulsafeeder K6VHC3 for the Size 6 PVC/Hypalon/ceramic PULSAtron maintenance configuration.
| Type | Accessories |
|---|
