Pulsafeeder K6PTT3 PULSAtron Size 6 FPP/PTFE/PTFE Double-Ball KOPkit
PULSAtron Size 6 PTT3 KOPkit with glass-filled polypropylene head, PTFE seats and O-rings, PTFE double-ball check valves and 1/2-inch OD tubing.
Pulsafeeder K6PTT3 KOPkit: Size 6 FPP/PTFE Kit with PTFE Valve Balls
The Pulsafeeder K6PTT3 is a PULSAtron Size 6 maintenance kit for PTT3 wet-end configurations. Searched as a Pulsatron K6PTT3 KOP kit or PTT3 rebuild kit, its selection code identifies a glass-filled polypropylene head, PTFE seats and O-rings, PTFE double-ball check valves and 1/2-inch OD tubing.
K6PTT3 Technical Specifications
- Part Number: K6PTT3
- Manufacturer: Pulsafeeder
- Product Family: PULSAtron KOPkit
- Head Size: 6
- Head Material: FPP / Glass-Filled Polypropylene
- Seats and O-Rings: PTFE / TFE
- Check Valves: PTFE Double-Ball
- Suction Connection: 1/2-Inch OD Tubing
- Discharge Connection: 1/2-Inch OD Tubing
- Wet-End Code: PTT3
All-PTFE Wetted Seals and Balls
The PTT configuration uses PTFE for both the seats and O-rings and the check-valve balls. Confirm that FPP and PTFE suit the chemical, concentration and temperature being metered.
How to Find the Right KOPkit for Your Pump
Check the pump nameplate or specification data sheet for the KOPkit number. From the model number, the fourth character is the head size and characters seven through ten are the wet-end code. A model in the format XXX6XX-PTT3-XXX takes the K6PTT3 kit.
K6PTT3 Versus K6PTC3
K6PTC3 shares the Size 6 FPP head, PTFE seals and 1/2-inch OD tubing but uses ceramic double-ball valves. Order the kit that matches the third letter of your wet-end code.
K6PTT3 Versus K6VTT3
K6VTT3 uses the same PTFE seals and PTFE balls on a PVC head. The first letter of the wet-end code identifies the head material.
Kit Contents
Distributors list the K6PTT3 as including the pump head assembly with valves, diaphragm, head screws and washers. Confirm the exact package contents before installation.
Installation Recommendations
Isolate electrical power, relieve discharge pressure and follow the Pulsafeeder service procedure.
Frequently Asked Questions
What does PTT3 mean?
P is the glass-filled polypropylene head, T is PTFE seats and O-rings, the second T is PTFE valve balls and 3 is the 1/2-inch OD tubing connection.
Which pumps take the K6PTT3?
PULSAtron pumps with a Size 6 head and a PTT3 wet end.
Ordering Information
Specify Pulsafeeder K6PTT3 for the Size 6 FPP/PTFE/PTFE double-ball maintenance configuration.
| Type | Accessories |
|---|
