Pulsafeeder K5VVC3 PULSAtron Size 5 PVC/Viton/Ceramic KOPkit
Pulsafeeder K5VVC3 Keep-On-Pumping kit for PULSAtron Size 5 pumps with VVC3 wet ends. PVC head, Viton seats and O-rings, ceramic valve balls and 3/8-inch ID x 1/2-inch OD tubing.
Pulsafeeder K5VVC3 KOPkit: Size 5 PVC/Viton Replacement Kit
The Pulsafeeder K5VVC3 is a Keep-On-Pumping kit for Size 5 PULSAtron pumps equipped with VVC3 wet ends. Often searched as a Pulsatron K5VVC3 KOP kit or VVC3 repair kit, its configuration includes a PVC pump head, Viton seats and O-rings, ceramic valve balls and 1/2-inch OD tubing connections.
K5VVC3 Product Specifications
| Feature | Specification |
|---|---|
| Part Number | K5VVC3 |
| Head Size | 5 |
| Head Material | PVC |
| Seats and O-Rings | Viton / FKM |
| Valve Balls | Ceramic |
| Suction Tubing | 3/8-Inch ID x 1/2-Inch OD |
| Discharge Tubing | 3/8-Inch ID x 1/2-Inch OD |
| Wet End | VVC3 |
Reading the VVC3 Code
The first V identifies the PVC pump head and the second V identifies Viton (FKM) seats and O-rings. C identifies ceramic valve balls and 3 identifies the 1/2-inch OD tubing connection.
How to Find the Right KOPkit for Your Pump
The KOPkit number is stamped on the pump nameplate and listed on the specification data sheet. From the model number, the fourth character is the head size and characters seven through ten are the wet-end code. A model in the format XXX5XX-VVC3-XXX takes the K5VVC3 kit.
Viton Sealing Components
Viton seats and O-rings set the VVC3 configuration apart from PTFE-sealed VTC3 and Hypalon-sealed VHC3 kits. Verify that Viton is compatible with the process chemical, concentration and temperature.
K5VVC3 Versus K5VTC3 and K5VHC3
All three kits share the Size 5 PVC head, ceramic valve balls and 1/2-inch OD tubing. K5VVC3 uses Viton seals, K5VTC3 uses PTFE seals and K5VHC3 uses Hypalon seals. The second letter of the wet-end code tells them apart.
K5VVC3 Versus K6VVC3
K6VVC3 uses the same VVC3 materials and tubing but fits Size 6 pumps. Head size must match the original pump.
Typical Maintenance Components
Solenoid diaphragm pump KOPkits generally include a pump head, diaphragm, check-valve assemblies and associated service components. Verify the exact contents of the supplied K5VVC3 kit.
Installation and Safety
Disconnect electrical power, isolate the chemical supply and relieve system pressure. Follow the official manufacturer installation instructions.
Frequently Asked Questions
What seal material does the K5VVC3 use?
K5VVC3 uses Viton (FKM) seats and O-rings.
Which pumps take the K5VVC3?
PULSAtron pumps with a Size 5 head and a VVC3 wet end. Confirm the KOPkit number on the pump nameplate.
Ordering Information
Order Pulsafeeder K5VVC3 for the Size 5 VVC3 PVC/Viton/ceramic configuration with 1/2-inch OD tubing.
| Type | Accessories |
|---|
