Pulsafeeder K5PTCH Size 5 FPP/PTFE/Ceramic Double-Ball KOPkit
PULSAtron Size 5 PTCH KOPkit with glass-filled polypropylene head, PTFE seats and O-rings and ceramic double-ball check valves.
Pulsafeeder K5PTCH KOPkit: Size 5 FPP/PTFE/Ceramic Replacement Kit
The Pulsafeeder K5PTCH is a PULSAtron Size 5 maintenance kit for PTCH wet-end configurations. Searched as a Pulsatron K5PTCH KOP kit or PTCH rebuild kit, its material code identifies a glass-filled polypropylene head, PTFE seats and O-rings and ceramic double-ball check valves.
K5PTCH Technical Specifications
- Part Number: K5PTCH
- Manufacturer: Pulsafeeder
- Product Family: PULSAtron KOPkit
- Head Size: 5
- Head Material: FPP / Glass-Filled Polypropylene
- Seats and O-Rings: PTFE / TFE
- Check-Valve Configuration: Ceramic Double-Ball
- Connection Code: H
- Wet-End Code: PTCH
Reading the PTCH Code
P identifies the glass-filled polypropylene head, T identifies PTFE seats and O-rings and C identifies ceramic valve balls. The final letter H is the connection code, which sets the suction and discharge connection configuration.
How to Find the Right KOPkit for Your Pump
Check the pump nameplate or specification data sheet for the KOPkit number. From the model number, the fourth character is the head size and characters seven through ten are the wet-end code. A model in the format XXX5XX-PTCH-XXX takes the K5PTCH kit. Confirm the suction and discharge connections on the original pump before ordering.
FPP Head with PTFE Seals
The PTC material combination pairs a glass-filled polypropylene head with PTFE seats and O-rings and ceramic double-ball check valves. Verify compatibility for the chemical, concentration and temperature.
K5PTCH Versus K5PTC3 and K5PTC4
All three share the Size 5 FPP/PTFE/ceramic materials. K5PTC3 uses 1/2-inch OD tubing and K5PTC4 uses 1/4-inch NPT threaded connections. The H suffix identifies a different connection, so the kits are not interchangeable.
Installation Recommendations
Isolate electrical power, relieve discharge pressure and follow the Pulsafeeder service procedure. Confirm the exact supplied kit components before installation.
Frequently Asked Questions
What materials does the K5PTCH use?
A glass-filled polypropylene head, PTFE seats and O-rings and ceramic double-ball check valves.
What does the H in K5PTCH mean?
H is the connection code. Match it to the wet-end code on your pump nameplate.
Ordering Information
Specify Pulsafeeder K5PTCH for the Size 5 PTCH FPP/PTFE/ceramic double-ball maintenance configuration.
| Type | Accessories |
|---|
