Pulsafeeder K4VTT1 Size 4 PVC/PTFE Double-Ball KOPkit
PULSAtron Size 4 VTT1 KOPkit with PVC head, PTFE seats and O-rings, PTFE double-ball check valves and 1/4-inch ID x 3/8-inch OD tubing.
Pulsafeeder K4VTT1: Size 4 PVC/PTFE KOPkit with PTFE Double-Ball Valves
The Pulsafeeder K4VTT1 is a Size 4 PULSAtron Keep-On-Pumping kit for VTT1 wet ends. It features PVC pump-head construction, PTFE seats and O-rings, and PTFE double-ball check valves.
Technical Specifications
| Feature | Specification |
|---|---|
| Part Number | K4VTT1 |
| Head Size | 4 |
| Head Material | PVC |
| Seats and O-Rings | PTFE / TFE |
| Check-Valve Design | PTFE Double-Ball |
| Tubing | 1/4-Inch ID x 3/8-Inch OD |
| Wet End | VTT1 |
PTFE Double-Ball Construction
The TDBL designation identifies a PTFE double-ball check-valve arrangement. This differs from the ceramic double-ball construction specified for K4VTC1 and K4VTC3.
PVC Head and PTFE Seals
The PVC/PTFE combination is an important part of the original wet-end specification. Check the actual chemical and operating conditions before confirming material suitability.
Why Use a KOPkit?
PULSAtron KOPkits package common liquid-end service components for scheduled maintenance. A typical kit includes the pump head, diaphragm, valve assemblies and associated hardware, depending on the model.
VTT1 Versus PTT1
K4VTT1 has a PVC head, whereas K4PTT1 has an FPP head. Both list PTFE double-ball valves and 3/8-inch OD tubing, but their head materials are different.
Connection Details
The specified tubing connection is 1/4-inch inside diameter by 3/8-inch outside diameter. Confirm the original fittings and wet-end designation before installation.
Maintenance Procedure
Isolate electrical power and the chemical feed system. Relieve pressure and follow the official Pulsafeeder instructions for liquid-end component replacement.
Ordering Information
Choose Pulsafeeder K4VTT1 for the Size 4 PVC/PTFE/PTFE double-ball maintenance configuration.
| Type | Accessories |
|---|
