Pulsafeeder K3VHC1 PULSAtron Size 3 PVC/Hypalon/Ceramic KOPkit

Pulsafeeder K3VHC1 PULSAtron Size 3 PVC KOPkit

The Pulsafeeder K3VHC1 is a Keep-On-Pumping preventive maintenance kit for compatible PULSAtron Size 3 diaphragm metering pumps. The VHC1 configuration identifies a PVC pump head, CSPE/Hypalon seats and O-rings, ceramic check balls and a 3/8-inch OD tubing connection.

Technical Specifications

• Manufacturer: Pulsafeeder
• Part Number: K3VHC1
• Product Type: KOPkit Maintenance Kit
• Pump Family: PULSAtron
• Head Size: 3
• Head Material: PVC
• Seat and O-Ring Material: CSPE / Hypalon
• Check Balls: Ceramic
• Connection: 3/8-Inch OD Tubing
• Wet-End Code: VHC1

Keep-On-Pumping Preventive Maintenance

Pulsafeeder KOPkits group common liquid-end replacement components for scheduled maintenance. Using the correct kit can simplify pump servicing and help reduce unexpected equipment downtime.

Typical KOPkit Components

PULSAtron solenoid diaphragm KOPkits generally include a diaphragm, pump head, check-valve assemblies, deflection plate, shims, secondary seal and installation instructions. Confirm the exact K3VHC1 contents against the current manufacturer packing list.

PVC Pump Head

The PVC head distinguishes K3VHC1 from the K3PHC1 configuration, which uses glass-filled polypropylene. The replacement kit must match the original pump head material.

Hypalon Seats and Ceramic Balls

CSPE/Hypalon sealing components and ceramic check balls are specified by the VHC1 wet-end code. Verify compatibility with the chemical being metered.

Size 3 Pump Compatibility

The K3 prefix identifies the Size 3 pump-head configuration. Check the complete pump model and KOPkit number shown on the pump nameplate before ordering.

Installation and Maintenance

Disconnect electrical power, isolate the chemical supply and relieve pressure before opening the pump liquid end. Follow the Pulsafeeder KOPkit installation instructions.

Ordering Information

Choose Pulsafeeder K3VHC1 for the Size 3 PVC/Hypalon/ceramic PULSAtron KOPkit.