Pulsafeeder K3PHC1 PULSAtron Size 3 FPP/Hypalon/Ceramic KOPkit
PULSAtron Size 3 Keep-On-Pumping maintenance kit with glass-filled polypropylene pump head, CSPE/Hypalon sealing components and ceramic check balls for the PHC1 wet-end configuration.
Pulsafeeder K3PHC1 PULSAtron Size 3 FPP KOPkit
The Pulsafeeder K3PHC1 is a Keep-On-Pumping preventive maintenance kit for compatible PULSAtron Size 3 diaphragm metering pumps. It uses a glass-filled polypropylene pump head, CSPE/Hypalon seats and O-rings, ceramic check balls and a 3/8-inch OD tubing configuration.
Product Specifications
- Manufacturer: Pulsafeeder
- Part Number: K3PHC1
- Product Type: KOPkit Maintenance Kit
- Pump Family: PULSAtron
- Head Size: 3
- Head Material: Glass-Filled Polypropylene / FPP
- Seat and O-Ring Material: CSPE / Hypalon
- Check Balls: Ceramic
- Connection: 3/8-Inch OD Tubing
- Wet-End Code: PHC1
Preventive Maintenance Application
The KOPkit provides a matched set of common liquid-end maintenance components for the specified PULSAtron configuration. It helps simplify scheduled service compared with sourcing individual replacement parts.
Glass-Filled Polypropylene Head
The FPP head is the defining difference between K3PHC1 and the PVC-headed K3VHC1. Select the kit that matches the original pump material configuration and chemical service requirements.
Hypalon Seals and Ceramic Check Balls
The PHC1 code specifies CSPE/Hypalon sealing components and ceramic check balls. These components should be compatible with the chemical concentration, temperature and operating conditions.
Typical Kit Contents
PULSAtron solenoid diaphragm KOPkits generally contain a diaphragm, pump head, check-valve assemblies, deflection plate, shims, secondary seal and installation instructions. Verify the exact supplied contents for K3PHC1.
Size 3 Wet-End Compatibility
The K3 designation identifies the Size 3 pump head, while PHC1 identifies the liquid-end materials and connection. Confirm the full pump model and nameplate KOPkit number before ordering.
Installation and Maintenance
Disconnect power, isolate the chemical feed system and relieve pressure before servicing. Follow the manufacturer installation procedure for the liquid-end components.
Ordering Information
Specify Pulsafeeder K3PHC1 for the Size 3 FPP/Hypalon/ceramic PULSAtron KOPkit.
| Type | Accessories |
|---|
