Pulsafeeder K2WTCJ Size 2 High-Pressure PVC/PTFE KOPkit
PULSAtron Size 2 WTCJ maintenance kit with high-pressure PVC head, PTFE seats and O-rings, ceramic double-ball check valves and 3/8-inch OD tubing.
Pulsafeeder K2WTCJ: Size 2 HPV/PTFE Chemical Metering Pump KOPkit
The Pulsafeeder K2WTCJ is a Keep-On-Pumping kit for compatible Size 2 PULSAtron pumps equipped with WTCJ wet ends. Its configuration includes high-pressure PVC head construction, PTFE sealing materials and ceramic double-ball check valves.
Product Specifications
| Feature | Specification |
|---|---|
| Part Number | K2WTCJ |
| Head Size | 2 |
| Head Material | HPV / High-Pressure PVC |
| Seats and O-Rings | PTFE / TFE |
| Check Valves | Ceramic Double-Ball |
| Suction Tubing | 1/4-Inch ID x 3/8-Inch OD |
| Discharge Tubing | 1/4-Inch ID x 3/8-Inch OD |
| Wet End | WTCJ |
Size 2 Liquid-End Maintenance
The KOPkit provides a coordinated replacement-parts option for routine maintenance of the specified Size 2 liquid end. Correctly matched parts help maintain the original pump assembly configuration.
High-Pressure PVC Construction
The W designation distinguishes this configuration from standard PVC-headed pumps. The complete pump model determines the applicable pressure rating and operating limits.
Ceramic Check-Valve Arrangement
The published material code identifies ceramic check-valve balls, and the KOPkit listing describes a double-ball configuration. Confirm the correct valve arrangement before servicing.
PTFE Sealing Components
PTFE seats and O-rings are part of the original WTCJ material specification. Chemical compatibility must be checked for the actual process conditions.
WTCJ and WTC1 Selection
Both suffixes correspond to 3/8-inch OD tubing in the published selection guide. Do not assume the kits are interchangeable without checking the original pump designation.
Typical Maintenance Components
Solenoid diaphragm pump KOPkits generally include a pump head, diaphragm, check-valve assemblies and associated service components. Verify the exact contents of the supplied K2WTCJ kit.
Installation and Safety
Disconnect electrical power, isolate the chemical supply and relieve system pressure. Follow the official manufacturer installation instructions.
Ordering Information
Order Pulsafeeder K2WTCJ for the Size 2 WTCJ high-pressure PVC/PTFE/ceramic double-ball configuration.
| Type | Accessories |
|---|
