Pulsafeeder K2PTC2 Size 2 FPP/PTFE/Ceramic Double-Ball KOPkit - 1/4-Inch NPT
Size 2 PULSAtron KOPkit for PTC2 wet ends with glass-filled polypropylene head, PTFE seals, ceramic double-ball check valves and 1/4-inch NPT connection.
Pulsafeeder K2PTC2: FPP/PTFE KOPkit with 1/4-Inch NPT Connection
The Pulsafeeder K2PTC2 is a Size 2 PULSAtron Keep-On-Pumping kit for PTC2 wet ends. Its glass-filled polypropylene pump head, PTFE sealing components, ceramic double-ball valves and threaded 1/4-inch NPT connection distinguish it from tubing-connected PTC1 kits.
Technical Data
| Specification | Details |
|---|---|
| Part Number | K2PTC2 |
| Product Type | PULSAtron KOPkit |
| Head Size | 2 |
| Head Material | FPP / Glass-Filled Polypropylene |
| Seats and O-Rings | PTFE / TFE |
| Check-Valve Arrangement | Ceramic Double-Ball |
| Connection | 1/4-Inch NPT |
| Wet-End Code | PTC2 |
Threaded Connection Versus Tubing Connection
K2PTC2 is listed with a 1/4-inch NPT connection. The related K2PTC1 uses 3/8-inch OD tubing. Confirm the original connection type because the configurations should not be assumed interchangeable.
Glass-Filled Polypropylene Construction
The FPP head distinguishes this kit from PVC-headed PULSAtron KOPkits. Match the original pump material and verify compatibility with the chemical being metered.
PTFE and Ceramic Valve Components
The PTFE sealing materials and ceramic double-ball check-valve configuration are important parts of the published PTC2 specification.
Maintenance and Reliability
The KOPkit provides common liquid-end service parts under a single manufacturer part number, helping simplify planned pump maintenance and replacement-parts management.
Before Installation
Confirm the pump head size, PTC2 code and threaded connection. Isolate electrical power and relieve system pressure before opening the pump liquid end.
Ordering Information
Specify Pulsafeeder K2PTC2 for the Size 2 FPP/PTFE/ceramic double-ball configuration with 1/4-inch NPT connection.
| Type | Accessories |
|---|
