Pulsafeeder K2PHC1 PULSAtron Size 2 FPP/Hypalon/Ceramic KOPkit
PULSAtron Size 2 Keep-On-Pumping maintenance kit with glass-filled polypropylene pump head, CSPE/Hypalon sealing components and ceramic check balls for 1/4-inch ID x 3/8-inch OD tubing.
Pulsafeeder K2PHC1 PULSAtron Size 2 FPP KOPkit
The Pulsafeeder K2PHC1 is a Keep-On-Pumping preventive maintenance kit for compatible PULSAtron Size 2 chemical metering pumps. It features a glass-filled polypropylene pump head, CSPE/Hypalon sealing components and ceramic check balls with 1/4-inch ID by 3/8-inch OD tubing connections.
Product Specifications
- Manufacturer: Pulsafeeder
- Part Number: K2PHC1
- Product Type: KOPkit Maintenance and Repair Kit
- Pump Family: PULSAtron
- Head Size: 2
- Pump Head Material: Glass-Filled Polypropylene / FPP
- Seat and O-Ring Material: CSPE / Hypalon
- Check Ball Material: Ceramic
- Tubing Connection: 1/4-Inch ID x 3/8-Inch OD
- Wet-End Configuration: PHC1
Preventive Maintenance for PULSAtron Pumps
The KOPkit program provides matched replacement components for routine metering pump maintenance. Using the correct kit helps simplify servicing and avoids ordering individual liquid-end wear parts separately.
Glass-Filled Polypropylene Construction
The K2PHC1 uses an FPP pump head rather than the PVC head supplied with the K2VHC1 configuration. This material difference is important when selecting a replacement kit for the original chemical feed application.
CSPE Seats and Ceramic Check Balls
The Hypalon seat and ceramic check-ball combination supports the specified PHC1 wet-end configuration. Confirm that all replacement materials are suitable for the chemical concentration and operating temperature.
Kit Contents
Pulsafeeder solenoid diaphragm KOPkits generally contain common pump liquid-end replacement components such as the diaphragm, head, check-valve assemblies, seals and installation materials. Actual supplied components depend on the pump configuration and should be confirmed against the manufacturer packing list.
Connection Requirements
The kit is listed for tubing with a 1/4-inch inside diameter and 3/8-inch outside diameter. Match the complete PHC1 pump code and tubing dimensions before purchasing.
Installation and Maintenance
Follow the original equipment maintenance procedure. Isolate the chemical system, disconnect electrical power and relieve pressure before opening the pump head.
Ordering Information
Choose Pulsafeeder K2PHC1 for the Size 2 glass-filled polypropylene/Hypalon/ceramic PULSAtron KOPkit.
| Type | Accessories |
|---|
