Pulsafeeder J61516 Chem-Tech Pump Head Mounting Bolt Kit - 4 Bolts and 4 Washers

The Pulsafeeder J61516 is a Chem-Tech pump head mounting bolt kit designed for servicing compatible chemical metering pumps. This replacement hardware kit contains four mounting bolts and four washers for securing the pump head according to the original equipment assembly configuration.

Pulsafeeder parts documentation identifies the kit as Kit, Head Mounting Bolts (4 - J37005, 4 - J42020). Distributor specifications identify stainless steel construction and a #10-24 x 2-inch bolt size.

Product Specifications

• Manufacturer: Pulsafeeder
• Part Number: J61516
• Product Name: Chem-Tech Pump Head Mounting Bolt Kit
• Product Type: Pump Head Mounting Hardware
• Catalog Description: Kit, Head Mounting Bolts
• Included Bolts: 4 Pieces
• Bolt Part Number: J37005
• Included Washers: 4 Pieces
• Washer Part Number: J42020
• Total Components: 8 Pieces
• Material: Stainless Steel, Distributor-Listed
• Bolt Size: #10-24 x 2 Inches, Distributor-Listed
• Product Family: Chem-Tech
• Documented Applications: Selected Series 100, 150 and 250 Pumps
• Exact Model Compatibility: Verify Manufacturer Parts Diagram

Included Kit Components

• 4 x J37005: Pump head mounting bolts
• 4 x J42020: Pump head mounting washers

The kit provides the manufacturer-listed mounting hardware components needed for the applicable pump head assembly.

Stainless Steel Mounting Hardware

The J61516 mounting bolt kit is identified by distributors as stainless steel hardware.

Stainless steel fasteners are commonly selected for equipment requiring mechanical durability and resistance to certain corrosive environments.

Actual corrosion resistance depends on the stainless steel grade and the operating environment. The specific alloy grade has not been independently confirmed.

#10-24 x 2-Inch Mounting Bolts

The supplied bolts are listed with a #10-24 thread designation and a 2-inch length.

The correct fastener dimensions and thread engagement are important when assembling the pump head.

Do not substitute bolts of a different thread, length or material without manufacturer approval.

Chem-Tech Pump Compatibility

Pulsafeeder catalogs list J61516 among Chem-Tech Series 250 replacement parts.

Distributor documentation also identifies the head bolt kit within the Chem-Tech Series 100/150 replacement parts collection.

Compatibility depends on the specific pump model and head assembly configuration. Confirm the original part number before ordering.

Potential Applications

• Chem-Tech chemical metering pump maintenance
• Pump head mounting hardware replacement
• Selected Chem-Tech Series 100 and 150 pump servicing
• Chem-Tech Series 250 pump maintenance
• Industrial chemical dosing equipment repair
• Water treatment chemical feed system maintenance
• Replacement of corroded or damaged mounting hardware

Inspection and Maintenance

Inspect the existing mounting bolts and washers for corrosion, damaged threads, deformation and other signs of wear.

Check the pump head and mounting surfaces for damage before reassembly.

Replace damaged hardware using the manufacturer-specified components.

Installation Guidelines

Before installing the Pulsafeeder J61516, confirm that the kit is specified for the applicable pump model and head assembly.

Disconnect power, isolate the chemical feed system and release system pressure before servicing the pump head.

Install the bolts and washers according to the manufacturer assembly instructions and tightening sequence. Use the specified tightening torque where provided.

After reassembly, inspect the pump head for leakage and verify proper pump operation.

Ordering Information

Order using the exact manufacturer part number J61516.

Confirm that the required kit contains four J37005 mounting bolts and four J42020 washers and is compatible with the pump head assembly.