Pulsafeeder J61073 PVDF/PTFE/PTFE Injection Check Valve - KTT3
PVDF injection check valve with PTFE seat and PTFE ball, 1/2-inch OD tubing and 1/2-inch male NPT process connection. Listed for PULSAtron KTT3 wet ends.
PVDF and PTFE Injection Valve for PULSAtron KTT3 Wet Ends
The Pulsafeeder J61073 is an injection back-check valve with PVDF housing, PTFE seat and PTFE check ball. Designed for compatible KTT3 wet ends, it uses 1/2-inch OD discharge tubing and a 1/2-inch male NPT process fitting.
Technical Data
| Specification | Value |
|---|---|
| Part Number | J61073 |
| Product Type | Injection Check Valve |
| Housing | PVDF / Kynar |
| Seat | PTFE / TFE |
| Check Ball | PTFE / TFE |
| Discharge Tubing | 1/2-Inch OD |
| Process Connection | 1/2-Inch Male NPT |
| Listed Wet End | KTT3 |
PVDF Housing for Chemical Handling
PVDF is used in selected chemical-handling applications. The body material should be evaluated together with the PTFE seat and check ball for compatibility with the actual process solution.
PTFE Seat and Check Ball
Both the sealing seat and check ball are PTFE. This distinguishes J61073 from PVDF injection valves that use ceramic or stainless steel check balls.
How the Valve Supports Metering
The injection check valve connects the pump discharge line to the receiving process. It provides a one-way flow path and helps resist process backflow into the chemical feed line.
KTT3 Connection Requirements
Confirm the KTT3 wet-end designation, 1/2-inch OD tubing and 1/2-inch male NPT injection connection before installation.
Maintenance Guidance
Check for crystallization, deposits, leakage and damaged fittings. Follow the original equipment instructions and depressurize the system before service.
Ordering Information
Order Pulsafeeder J61073 for the PVDF/PTFE/PTFE injection valve with 1/2-inch OD tubing used on compatible KTT3 wet ends.
| Type | Accessories |
|---|
