Pulsafeeder J60729 PVDF/CSPE/Ceramic Foot Valve Strainer - 3/8 x 1/2 Inch
Pulsafeeder J60729 PVDF/CSPE/ceramic foot valve and suction strainer assembly for 3/8-inch ID x 1/2-inch OD tubing.
The Pulsafeeder J60729 is a PVDF foot valve and strainer assembly for compatible chemical metering pump suction systems. The catalog specifies a PVDF/CSPE/ceramic configuration with 3/8-inch ID x 1/2-inch OD tubing.
Product Specifications
- Manufacturer: Pulsafeeder
- Part Number: J60729
- Product Type: Foot Valve / Strainer Assembly
- Body Material: PVDF
- Seat/Seal Designation: CSPE
- Check Ball Material: Ceramic
- Tubing ID: 3/8 Inch
- Tubing OD: 1/2 Inch
- Catalog Configuration: PVD/CSPE/C
- Pressure Rating: Verify Manufacturer Documentation
Foot Valve and Strainer Function
The assembly is installed on the chemical suction line. Its strainer helps screen debris before liquid enters the pump, while the foot valve helps limit reverse flow and maintain the suction line condition.
PVDF Construction
PVDF is used for the body of this assembly. Verify chemical compatibility with the fluid concentration, temperature and operating conditions.
CSPE and Ceramic Components
The catalog identifies CSPE and ceramic components. These material specifications must match the original liquid-end requirements.
Tubing Compatibility
J60729 is specified for tubing with a 3/8-inch inside diameter and 1/2-inch outside diameter. Confirm the complete tubing dimensions before ordering.
Typical Applications
- Chemical metering pump suction lines
- Industrial water treatment systems
- Chemical storage tank suction assemblies
- Foot valve and strainer replacement
Maintenance and Installation
Inspect the strainer for debris and the valve components for wear. Isolate the chemical system before replacement and follow the applicable pump manual.
Ordering Information
Order J60729 for the PVDF/CSPE/ceramic 3/8-inch ID x 1/2-inch OD configuration.
| Type | Accessories |
|---|
