Pulsafeeder J60552 Strainer Assembly Without Valve - 1/4 Inch Tubing

The Pulsafeeder J60552 is a suction strainer assembly without valve designed for compatible Pulsafeeder chemical metering pump systems. The manufacturer identifies this replacement component as Strainer Assembly w/o Valve.

The assembly is used in compatible chemical feed suction arrangements to help prevent debris from entering the pump through the suction tubing. Distributor specifications identify a polypropylene body and 1/4-inch tubing connection.

Product Specifications

• Manufacturer: Pulsafeeder
• Part Number: J60552
• Product Name: Strainer Assembly Without Valve
• Product Type: Suction Strainer Assembly
• Official Catalog Description: Strainer Assembly w/o Valve
• Body Material: Polypropylene, Distributor Listed
• Tubing Connection: 1/4 Inch
• Connection Type: Tube
• Valve Included: No, Per Manufacturer Catalog
• Product Families: MEC-O-MATIC Dolphin, VSP and Chem-Tech XP/XPV
• Distributor Listed Models: D50 and VSP20
• Mounting Orientation: Vertical, Distributor Listed
• Pressure Rating: Not Independently Verified
• Temperature Rating: Not Independently Verified
• Chemical Compatibility: Verify Before Use

Suction Strainer Function

The J60552 strainer assembly is intended for use in a compatible chemical metering pump suction line.

A suction strainer helps reduce the entry of debris and suspended particles into the pump inlet.

Preventing debris from entering the suction system can help reduce contamination-related maintenance issues.

Strainer Assembly Without Valve

Pulsafeeder identifies J60552 as a strainer assembly without valve.

This distinction is important when selecting replacement suction accessories. A strainer without a valve should not be assumed to provide the backflow prevention or priming functions of a foot valve assembly.

Confirm the complete suction assembly requirements before installation.

Polypropylene Construction

Distributor specifications identify the strainer body material as polypropylene.

Polypropylene is commonly used in chemical feed equipment because of its compatibility with many industrial fluids.

Actual chemical resistance depends on the fluid composition, concentration and operating temperature.

1/4-Inch Tubing Connection

The Pulsafeeder J60552 is listed with a 1/4-inch tubing connection.

Verify the tubing outside diameter, connection hardware and installation requirements against the original equipment specifications.

Do not assume compatibility with other tubing sizes without manufacturer confirmation.

MEC-O-MATIC Dolphin Compatibility

The manufacturer lists J60552 in its Dolphin Series parts schedule.

Distributor specifications identify the D50 as one compatible pump model.

Other Dolphin configurations should be checked against their specific replacement parts documentation.

Chem-Tech XP and XPV Applications

The Pulsafeeder Chem-Tech XP/XPV Series parts schedule also lists J60552 as a replacement strainer assembly without valve.

Confirm the correct suction connection configuration for the specific XP or XPV model before purchasing.

Potential Applications

• Compatible chemical metering pump suction lines
• MEC-O-MATIC Dolphin pump maintenance
• Chem-Tech XP and XPV pump servicing
• VSP Series suction strainer replacement
• Industrial chemical feed equipment
• Water treatment chemical dosing systems
• Replacement of clogged or damaged suction strainers

Inspection and Maintenance

Inspect the suction strainer for accumulated debris, cracks, damage and chemical deterioration.

Check the tubing connection and associated hardware for secure installation.

Clean or replace the strainer according to the applicable pump maintenance instructions.

Installation Guidelines

Confirm that J60552 matches the original equipment parts list.

Disconnect power, isolate the chemical feed system and release pressure before servicing.

Install the strainer in the manufacturer-specified suction arrangement using compatible tubing and connection hardware.

Verify that the assembly is correctly positioned and that the suction line is free from leaks or restrictions.

Ordering Information

Order using the exact manufacturer part number J60552.

Confirm the strainer-only configuration, 1/4-inch tubing connection and compatibility with the intended pump model.