Pulsafeeder J40124 PVT1 FPP/Viton/PTFE Foot Valve & Strainer
PVT1 foot valve and strainer assembly with FPP housing, Viton seat and PTFE ball, for 1/4-inch ID x 3/8-inch OD chemical feed suction tubing.
Pulsafeeder J40124 PVT1 Chemical Suction Foot Valve
The Pulsafeeder J40124 is a compact foot valve and strainer assembly designed for the PVT1 wet-end configuration. It uses an FPP body, Viton valve seat and PTFE check ball with a 1/4-inch ID x 3/8-inch OD tubing connection.
Designed for the PVT1 Suction Line
J40124 uses smaller suction tubing than the PVT3 model J40125. Although both feature FPP/Viton/PTFE construction, their tubing sizes and specified wet-end configurations differ.
Product Specifications
- Manufacturer: Pulsafeeder
- Part Number: J40124
- Component: Foot Valve and Strainer Assembly
- Housing: FPP / Polypropylene
- Seat: Viton / FKM
- Check Ball: PTFE
- Tubing Inside Diameter: 1/4 Inch
- Tubing Outside Diameter: 3/8 Inch
- Wet End: PVT1
Suction Inlet Protection
The strainer helps keep larger particles from entering the chemical suction line. The foot-valve check mechanism helps resist reverse liquid movement when the pump is not drawing fluid.
PTFE and Viton Material Configuration
The PTFE ball and Viton seat are specified components of this assembly. Both should be checked for compatibility with the chemical solution and the original pump liquid end.
Inspection and Replacement
Inspect the strainer screen for blockage and check the seating components for wear or contamination. Match the original PVT1 designation and tubing dimensions before installing a replacement.
Ordering Information
Choose Pulsafeeder J40124 for the PVT1 FPP/Viton/PTFE foot valve and strainer with 1/4-inch ID x 3/8-inch OD tubing.
| Type | Accessories |
|---|
