
Pulsafeeder J30517 PVC/Viton Bleed Valve Kit - 1/2-Inch
PVC/Viton bleed valve kit with 1/2-inch tubing connection for compatible CHEM-TECH chemical metering pumps. Viton-sealed configuration for pump priming and maintenance.
Pulsafeeder J30517 PVC/Viton Bleed Valve Kit
The Pulsafeeder J30517 is a PVC/Viton bleed valve kit with a 1/2-inch tubing connection, documented in CHEM-TECH chemical metering pump replacement-parts listings. Its Viton/FKM sealing designation distinguishes it from otherwise similar PTFE-sealed bleed valve configurations.
Viton-Sealed Chemical Pump Bleed Valve
The bleed valve is part of the pump priming arrangement. When operated according to the manufacturer instructions, it provides a path for releasing trapped air that may interfere with normal liquid delivery.
Technical Specifications
- Manufacturer: Pulsafeeder
- Part Number: J30517
- Component: Bleed Valve Kit
- Body Material: PVC
- Seal Material: Viton / FKM
- Tubing Connection: 1/2 Inch
- Documented Parts Family: CHEM-TECH Series 100, 150, 100D, 150D and 200
Difference Between Viton and PTFE Kits
J30517 is the PVC/Viton version, whereas J30518 is the PVC/PTFE version. Both have a nominal 1/2-inch tubing designation. Material compatibility and the original equipment configuration determine which replacement should be selected.
Chemical Compatibility Considerations
Viton is a fluoroelastomer used in selected chemical-handling components. Its resistance varies with the chemical, concentration and temperature. Confirm the suitability of the complete PVC/Viton wetted assembly before installation.
Priming and Troubleshooting
Trapped gas, blocked suction tubing and damaged check valves can all affect metering pump operation. Inspect the bleed valve as part of a complete troubleshooting procedure rather than assuming it is the only possible cause of priming problems.
Service Recommendations
Check for leaks, chemical deposits, damaged connections and worn sealing surfaces. Depressurize the pump and follow the applicable CHEM-TECH maintenance procedure before replacing components.
Ordering Information
Choose Pulsafeeder J30517 when the original pump specifies a 1/2-inch PVC/Viton bleed valve kit.
| Type | Accessories |
|---|
