Pulsafeeder 41700 PVC/Viton/Ceramic 6-Inch Injection Valve - 1/2-Inch OD
6-inch chemical injection quill with PVC body, Viton seat, ceramic check ball, 1/2-inch OD tubing and 1/2-inch male NPT process connection.
Pulsafeeder 41700 PVC/Viton/Ceramic 6-Inch Injection Valve
The Pulsafeeder 41700 is a 6-inch chemical injection quill assembly designed to introduce metered chemical solution into a process line. It features a PVC housing, Viton/FKM seat, ceramic check ball, 1/2-inch OD tubing connection and 1/2-inch male NPT process fitting.
Technical Specifications
- Manufacturer: Pulsafeeder
- Part Number: 41700
- Product Type: Injection Valve with Quill
- Quill Length Designation: 6 Inches
- Body Material: PVC
- Valve Seat: Viton / FKM
- Check Ball: Ceramic
- Tubing Connection: 1/2-Inch OD
- Process Connection: 1/2-Inch Male NPT
- Configuration: Ball Check Assembly
Extended Chemical Injection
The 6-inch injection quill is designed to extend into the process line, allowing chemical solution to enter farther into the flowing stream. Proper positioning depends on the process pipe size and installation requirements.
Integrated Check-Valve Function
The ball check mechanism helps resist reverse flow from the process line into the chemical discharge tubing. It forms part of the injector assembly and must be maintained according to the equipment instructions.
Viton Seat and Ceramic Ball
The PVC/Viton/ceramic configuration distinguishes 41700 from the PVC/CSPE/ceramic 41698 injector. Both are listed with 1/2-inch OD tubing, but their sealing materials differ.
Quill Length and Installation
Pulsafeeder literature describes its 6-inch injectors as trimmable for suitable process pipe sizes. Any length adjustment must follow the manufacturer instructions and preserve the required injection and check-valve arrangement.
Inspection and Maintenance
Inspect the injector for chemical deposits, leaks, damaged fittings and restrictions. Verify the process fitting, chemical compatibility and system pressure before installation.
Ordering Information
Specify Pulsafeeder 41700 for the 6-inch PVC/Viton/ceramic injection valve with 1/2-inch OD tubing and 1/2-inch male NPT connection.
| Type | Accessories |
|---|
