Pulsafeeder 41698 PVC/CSPE/Ceramic 6-Inch Injector - 1/2-Inch OD

Pulsafeeder 41698 PVC/CSPE/Ceramic 6-Inch Chemical Injector

The Pulsafeeder 41698 is a 6-inch chemical injection assembly identified in the Pulsafeeder systems and accessories catalog. It features a PVC body, CSPE/Hypalon valve seat, ceramic check ball and 1/2-inch OD tubing connection.

Technical Specifications

• Manufacturer: Pulsafeeder
• Part Number: 41698
• Product Type: 6-Inch Chemical Injector
• Body Material: PVC
• Seat Material: CSPE / Hypalon
• Check Ball: Ceramic
• Tubing Connection: 1/2-Inch OD
• Injector Designation: 6 Inch
• Configuration: Ball Check Assembly

Extended Chemical Injection Assembly

The 6-inch injector is intended to introduce chemical solution into a process line. Its extended configuration can position the injection point closer to the center of the flowing stream, depending on the pipe dimensions.

Ball Check Backflow Protection

The integrated ball check mechanism allows chemical solution to enter the process system while helping resist reverse flow toward the discharge tubing.

CSPE Seat and Ceramic Ball

The CSPE/Hypalon sealing designation distinguishes part 41698 from the Viton-seated 41699. Both use PVC construction and ceramic check balls, but the tubing sizes and seat materials differ.

1/2-Inch OD Tubing Connection

Confirm the 1/2-inch outside diameter of the discharge tubing and the original injector specification. Tubing dimensions, process connection and material compatibility are important for correct replacement selection.

Installation and Inspection

Manufacturer literature describes 6-inch injectors as trimmable for appropriate pipe sizes. Follow the original installation instructions before making modifications. Inspect the assembly for chemical buildup, leakage and damaged fittings.

Ordering Information

Choose Pulsafeeder 41698 for the PVC/CSPE/ceramic 6-inch chemical injector with 1/2-inch OD tubing and ball check assembly.