Pulsafeeder 33424 Neoprene Packing Set, 0.63-Inch ID x 1.0-Inch OD

Pulsafeeder 33424 Neoprene Packing Set, 0.63-Inch ID x 1.0-Inch OD

The Pulsafeeder 33424 is a neoprene packing set sized 0.63-inch inside diameter by 1.0-inch outside diameter. Packing sets seal around a moving shaft or plunger and are routine wear parts that should be replaced during scheduled pump maintenance.

33424 Specifications

• Manufacturer: Pulsafeeder
• Part Number: 33424
• Product Type: Packing Set
• Material: Neoprene
• Inside Diameter: 0.63 Inch
• Outside Diameter: 1.0 Inch

Confirm Fitment Before Ordering

Packing sets are matched to a specific pump model and shaft or plunger diameter. Check that 33424 appears on the parts list for your Pulsafeeder pump, or confirm with Pulsafeeder using the model and serial number from the pump nameplate.

Neoprene Packing Material

Neoprene is an elastomer used for sealing in a range of water and chemical services. Confirm that neoprene is compatible with the fluid, concentration and temperature in your application.

When to Replace Packing

Replace the packing set when leakage at the seal increases or during scheduled overhauls. Replacing the full set at once helps keep the seal even.

Installation and Safety

Disconnect power, isolate the pump and relieve pressure before removing old packing. Follow the pump manufacturer service instructions for packing installation and adjustment.

Frequently Asked Questions

What size is the 33424 packing set?

0.63-inch inside diameter by 1.0-inch outside diameter.

Which pump does the 33424 fit?

Fitment depends on the pump model. Check the parts list for your pump or confirm with Pulsafeeder using the nameplate details.

Ordering Information

Specify Pulsafeeder 33424 for the neoprene packing set, 0.63-inch ID x 1.0-inch OD.