Pulsafeeder 26860AT PVC Bulkhead Fitting with Strainer - 3/8 Inch, Tank Installed

The Pulsafeeder 26860AT is a PVC bulkhead fitting assembly with strainer, supplied factory-installed in a compatible chemical solution tank. The assembly is designed for a 3/8-inch outside-diameter tubing connection.

Pulsafeeder identifies 26860 as the fitting kit and 26860AT as the corresponding assembled-in-tank configuration. This distinction is important when selecting replacement parts or ordering a chemical feed tank with an installed suction connection.

Product Specifications

• Manufacturer: Pulsafeeder
• Part Number: 26860AT
• Product Type: Bulkhead Fitting Assembly
• Material: PVC
• Tubing Connection: 3/8-Inch OD
• Strainer: Included
• Configuration: Factory Installed in Tank
• Corresponding Fitting Kit: 26860
• Application: Flooded Suction Chemical Feed Tank Connection
• Manufacturer Tank Range for Installed Option: 15 to 75 Gallons
• Pressure Rating: Not Independently Verified
• Seal Material: Not Independently Verified

Chemical Feed Tank Bulkhead Connection

The 26860AT assembly provides a connection through the tank wall for a compatible chemical metering pump suction line. It is intended for flooded suction installations using the manufacturer-specified tank and tubing arrangement.

Integrated Strainer

The corresponding 26860 bulkhead fitting assembly includes a strainer to help reduce the entry of debris into the pump suction line. The strainer is an important distinction from bulkhead fitting versions supplied without a strainer.

3/8-Inch OD Tubing

The assembly is specified for 3/8-inch outside-diameter tubing. Confirm the tubing dimensions, material and connection requirements against the original equipment documentation.

Factory-Installed Configuration

The AT suffix identifies the assembled-in-tank option. Pulsafeeder documentation describes this option for compatible 15- to 75-gallon tanks when ordered with the applicable tank.

The part number does not, by itself, identify a complete tank size or establish that a standalone tank is included.

Typical Applications

• Chemical metering pump flooded suction installations
• Industrial chemical solution tanks
• Water treatment chemical feed systems
• Factory-installed tank suction connections
• Replacement specification for tank bulkhead assemblies

Installation and Maintenance

Inspect the tank connection, strainer and tubing for blockage, cracks, chemical deterioration and leakage. Follow the manufacturer installation instructions and chemical handling procedures when servicing a tank connection.

Ordering Information

Order 26860AT when the manufacturer-specified factory-installed configuration is required. For a separately supplied fitting kit, verify the corresponding 26860 part number.