Pulsafeeder 16-171-81-3 10-Foot Liquid Level Wand Connector Cable

The Pulsafeeder 16-171-81-3 is a 10-foot cable with connector used with compatible Pulsafeeder liquid level wands and PULSAtron chemical metering pumps equipped with the stop function.

Pulsafeeder identifies this cable in its official Liquid Level Wand technical sheet. It is used with the specified level wand models to provide the required connection to a compatible stop-function pump.

Product Specifications

• Manufacturer: Pulsafeeder
• Part Number: 16-171-81-3
• Product Type: Liquid Level Wand Connector Cable
• Cable Length: 10 Feet
• Connector: Included
• Compatible Level Wands: 16-171-81-1, 16-171-81-2, 16-171-81-4
• Pump Family: PULSAtron
• Application: Pumps with External Stop Function
• Cable Conductor Details: Not Independently Verified
• Connector Pinout: Verify Manufacturer Documentation
• Environmental Rating: Not Independently Verified

Liquid Level Wand Connection

The 16-171-81-3 cable connects a compatible liquid level wand to a PULSAtron metering pump with the required stop-function interface.

Liquid level monitoring accessories can be used to support pump control arrangements that respond to the solution level in a chemical tank.

Compatible Liquid Level Wands

The official manufacturer technical sheet identifies three compatible level wand part numbers: 16-171-81-1, 16-171-81-2 and 16-171-81-4.

These wands are separately identified products with different adjustable lengths. The cable itself is not a complete level wand.

10-Foot Cable

The manufacturer specifies a 10-foot cable with connector. Confirm that the cable length and connector arrangement are suitable for the tank location and pump installation.

PULSAtron Stop Function

Pulsafeeder instructs users to order this cable when using the specified liquid level wands with PULSAtron pumps equipped with the stop function.

Verify that the pump model supports the required external stop input before installation.

Typical Applications

• PULSAtron liquid level monitoring connections
• Chemical tank low-level control arrangements
• Replacement of damaged liquid level wand cables
• Industrial chemical dosing system maintenance
• Water treatment metering pump accessories

Installation Guidelines

Disconnect pump power before servicing electrical connections. Connect the cable to the manufacturer-specified wand and pump interface according to the applicable wiring instructions.

Route the cable to avoid mechanical damage, chemical exposure and interference with other equipment.

Ordering Information

Order 16-171-81-3 for the cable with connector. Select the required liquid level wand separately and confirm pump stop-function compatibility.