Pulsatron LD54SA-VHC1-XXX Electronic Metering Pump
Pulsafeeder LD54SA-VHC1-XXX PULSAtron Series C Plus diaphragm metering pump delivers up to 30 GPD at 80 PSI with 115V power, PVC liquid end and dual manual control.
The Pulsafeeder LD54SA-VHC1-XXX PULSAtron Series C Plus Metering Pump is a solenoid-driven diaphragm metering pump designed for accurate and dependable chemical feed applications. It provides a maximum flow rate of 1.25 GPH (30 GPD / 4.7 LPH) at pressures up to 80 PSI (5.6 bar).
The LD54SA-VHC1-XXX operates on 115 VAC, 50/60 Hz power and features dual manual control, allowing both stroke frequency and stroke length to be adjusted while the pump is operating. This provides flexible control over chemical feed rates for water treatment and industrial dosing applications.
The pump features a PVC head and fittings, CSPE (Hypalon) valve seats and O-rings, ceramic valve balls, and a PTFE-faced CSPE diaphragm. It uses 3/8-inch OD tubing for suction and discharge connections.
PULSAtron Series C Plus pumps use a positive-displacement diaphragm design with a guided ball check valve system. This design helps reduce backflow while supporting dependable priming and repeatable chemical metering.
Key Features
- Manufacturer: Pulsafeeder
- Brand / Product Line: PULSAtron
- Model: LD54SA-VHC1-XXX
- Series: C Plus / C+
- Pump Type: Solenoid-Driven Diaphragm Metering Pump
- Maximum Flow: 1.25 GPH / 30 GPD / 4.7 LPH
- Maximum Pressure: 80 PSI / 5.6 Bar
- Voltage: 115 VAC
- Frequency: 50/60 Hz
- Control: Dual Manual Control
- Head / Fittings: PVC
- Valve Seats / O-Rings: CSPE (Hypalon)
- Valve Balls: Ceramic
- Diaphragm: PTFE-Faced CSPE
- Connection: 3/8" OD Tubing
- Maximum Viscosity: 1,000 CPS
- Maximum Stroke Rate: 125 strokes per minute
- Turndown Ratio: 100:1
- Adjustable stroke frequency and stroke length
- Guided ball check valve system
- Thermal overload protection with automatic reset
- Leak-free, sealless liquid end
- Suitable for indoor and outdoor installations
Applications
The Pulsafeeder LD54SA-VHC1-XXX chemical metering pump is suitable for precise chemical dosing and injection applications such as:
- Water treatment systems
- Wastewater treatment
- Chlorination and disinfection
- Chemical injection systems
- pH adjustment
- Industrial process water
- Chemical feed systems
- Cooling tower chemical treatment
- Boiler water treatment
