Pulsafeeder LC54SA-PTC1-XXX PULSAtron Series C Metering Pump
Pulsafeeder LC54SA-PTC1-XXX PULSAtron Series C diaphragm metering pump delivers up to 30 GPD at 80 PSI with manual stroke-length control and 115 VAC operation.
The Pulsafeeder LC54SA-PTC1-XXX is a PULSAtron Series C chemical metering pump designed for accurate and dependable chemical dosing applications. This solenoid-driven diaphragm pump provides a maximum output of 30 gallons per day (1.25 GPH) at pressures up to 80 PSI.
The LC54SA-PTC1-XXX features manual stroke-length adjustment with a fixed stroke frequency, providing straightforward control of chemical feed output. Its Series C design combines a reliable electronic timing circuit, guided ball check valves and a sealless diaphragm liquid end for consistent metering performance.
Product Details
- Manufacturer: Pulsafeeder
- Model: LC54SA-PTC1-XXX
- Product Family: PULSAtron Series C
- Pump Type: Solenoid-Driven Diaphragm Metering Pump
- Maximum Flow: 30 GPD / 1.25 GPH
- Maximum Pressure: 80 PSI
- Control: Single Manual Control
- Turndown Ratio: 10:1
- Maximum Stroke Rate: 125 strokes per minute
- Power Supply: 115 VAC, 50/60 Hz
- Head / Fittings: Glass-Filled Polypropylene (GFPP/GFPPL)
- Valve Balls: Ceramic
- Valve Seats / O-Rings: TFE
- Diaphragm: PTFE-Faced CSPE
- Connection: 3/8-inch OD Tubing
Metering Performance
The PULSAtron Series C uses positive-displacement diaphragm technology for controlled chemical delivery. Output can be adjusted while the pump is operating by changing the stroke length, while the stroke frequency remains fixed.
Liquid-End Construction
The LC54SA-PTC1-XXX uses a glass-filled polypropylene liquid end with TFE valve seats and O-rings, ceramic valve balls and a PTFE-faced CSPE diaphragm. This combination is designed for chemical metering applications requiring dependable liquid handling and corrosion-resistant wetted components.
Key Features
- Maximum capacity of 30 GPD at 80 PSI
- Manual online stroke-length adjustment
- 10:1 maximum turndown ratio
- Guided ball check valve system for dependable priming
- Leak-free, sealless diaphragm liquid end
- Water-resistant construction for indoor and outdoor applications
- Thermal overload protection with automatic reset
- Internally dampened operation to reduce noise
- Designed for continuous-duty chemical metering
Typical Applications
The LC54SA-PTC1-XXX is suitable for controlled chemical injection and dosing in water treatment, wastewater treatment, industrial processing and other applications requiring accurate delivery of liquid chemicals.
Verify chemical compatibility, operating pressure, required feed rate and installation conditions before selecting the LC54SA-PTC1-XXX for a specific application.
